Hydraulic ejection force KN Ejector pin POWER UNIT Hydraulic system pressure MPa Pump motor



Description UNIT BT60V-II
INJECTION UNIT
Shot volume cm3 68/86/
Shot weight(PS) g 60/78
Shot weight(PS) oz 2.1/2.8
Screw diameter mm 25/28
Injection pressure Mpa 223/178
Scerw L:D ratio - 22/22
Screw stroke mm 140
Screw speed(stepless) rpm 260
CLAMPING UNIT
Clamping force KN 600
Opening stroke mm 270
Platen size mmxmm 540x540
Space between tie bars mmxmm 310x310
Max.daylight mm 570
Mold thickness（Min.Max） mm 130-300
Hydraulic ejection stroke mm 80
Hydraulic ejection force KN 28.5
Ejector pin - 4+1
POWER UNIT
Hydraulic system pressure MPa 14.5
Pump motor KW 7.5
Heating capacity KW 4.85
Number of temp control zones - 4
GENERAL UNIT
Oil tank capacity L 160
Machine dimensions mxmxm 4.3x1.1x1.7
Machine weight Kg 2600
 
 
 
 
 
 
 

Description UNIT BT80V- II
INJECTION UNIT
Shot volume cm3 120/163/212
Shot weight(PS) g 113/153/199
Shot weight(PS) oz 4/5.4/7
Screw diameter mm 30/35/40
Injection pressure Mpa 220/161/124
Scerw L:D ratio - 23:1/20.5:1/18:1
Screw stroke mm 170
Screw speed(stepless) rpm 0-180
CLAMPING UNIT
Clamping force KN 800
Opening stroke mm 320
Platen size mmxmm 540x540
Space between tie bars mmxmm 360x360
Max.daylight mm 680
Mold thickness（Min.Max） mm 130-360
Hydraulic ejection stroke mm 100
Hydraulic ejection force KN 28.5
Ejector pin - 4+1
POWER UNIT
Hydraulic system pressure MPa 14.5
Pump motor KW 7.5
Heating capacity KW 6.5
Number of temp control zones - 4
GENERAL UNIT
Oil tank capacity L 200
Machine dimensions mxmxm 4.87x1.1x1.7
Machine weight Kg 300

 

 
 
 
 
 
 

Description UNIT BT120V-II
INJECTION UNIT
Shot volume cm3 182/238/301
Shot weight(PS) g 171/225/283
Shot weight(PS) oz 6/8/10
Screw diameter mm 35/40/45
Injection pressure Mpa 222/169/134
Scerw L:D ratio - 23:1/20.5:1/18:1
Screw stroke mm 190
Screw speed(stepless) rpm 0-187
CLAMPING UNIT
Clamping force KN 1200
Opening stroke mm 340
Platen size mmxmm 590x590
Space between tie bars mmxmm 410x410
Max.daylight mm 790
Mold thickness（Min.Max） mm 145-450
Hydraulic ejection stroke mm 100
Hydraulic ejection force KN 34.3
Ejector pin - 4+1
POWER UNIT
Hydraulic system pressure MPa 17.5
Pump motor KW 11
Heating capacity KW 8.85
Number of temp control zones - 5
GENERAL UNIT
Oil tank capacity L 200
Machine dimensions mxmxm 4x1.18x1.7
Machine weight Kg 3000

 
 
 
 
 
 
 
 
 
 

Description UNIT BT150V-II
INJECTION UNIT
Shot volume cm3 270/342/422
Shot weight(PS) g 254/321/397
Shot weight(PS) oz 9/11.3/14
Screw diameter mm 40/45/50
Injection pressure Mpa 209/166/134
Scerw L:D ratio - 23:1/20.5:1/18:1
Screw stroke mm 215
Screw speed(stepless) rpm 0-205
CLAMPING UNIT
Clamping force KN 1500
Opening stroke mm 410
Platen size mmxmm 670x670
Space between tie bars mmxmm 460x460
Max.daylight mm 910
Mold thickness（Min.Max） mm 160-500
Hydraulic ejection stroke mm 130
Hydraulic ejection force KN 42
Ejector pin - 4+1
POWER UNIT
Hydraulic system pressure MPa 17.5
Pump motor KW 15
Heating capacity KW 9.76
Number of temp control zones - 5
GENERAL UNIT
Oil tank capacity L 250
Machine dimensions mxmxm 4.7x1.2x1.8
Machine weight Kg 4100

 
 
 
 
 
 
 

Description UNIT BT200V-II
INJECTION UNIT
Shot volume cm3 389/481/692
Shot weight(PS) g 365/452/650
Shot weight(PS) oz 12.9/16/23
Screw diameter mm 45/50/60
Injection pressure Mpa 217/176/122
Scerw L:D ratio - 23:1/20.5:1/17:1
Screw stroke mm 245
Screw speed(stepless) rpm 0-146
CLAMPING UNIT
Clamping force KN 2000
Opening stroke mm 460
Platen size mmxmm 740X740
Space between tie bars mmxmm 510X510
Max.daylight mm 1010
Mold thickness（Min.Max） mm 180-550
Hydraulic ejection stroke mm 150
Hydraulic ejection force KN 49
Ejector pin - 4+1
POWER UNIT
Hydraulic system pressure MPa 17.5
Pump motor KW 18.5
Heating capacity KW 9.76
Number of temp control zones - 5
GENERAL UNIT
Oil tank capacity L 260
Machine dimensions mxmxm 5.2X1.3X1.9
Machine weight Kg 5000

 
 
 
 
 
 
 
 
 

Description UNIT BT260V-II
INJECTION UNIT
Shot volume cm3 588/848/1154
Shot weight(PS) g 552/800/1085
Shot weight(PS) oz 19.5/28.3/38.3
Screw diameter mm 50/60/70
Injection pressure Mpa 232/161/118
Scerw L:D ratio - 25:1/21:1/18:1
Screw stroke mm 300
Screw speed(stepless) rpm 0-154
CLAMPING UNIT
Clamping force KN 2600
Opening stroke mm 520
Platen size mmxmm 835X835
Space between tie bars mmxmm 580X580
Max.daylight mm 1120
Mold thickness（Min.Max） mm 195-600
Hydraulic ejection stroke mm 180
Hydraulic ejection force KN 77
Ejector pin - 8+1
POWER UNIT
Hydraulic system pressure MPa 17.5
Pump motor KW 22
Heating capacity KW 14
Number of temp control zones - 6
GENERAL UNIT
Oil tank capacity L 462
Machine dimensions mxmxm 5.7X1.3X2.2
Machine weight Kg 10000

 
 
 
 
 
 
 
 
 

Description UNIT BT320V-II
INJECTION UNIT
Shot volume cm3 989/1346/1759
Shot weight(PS) g 928/1266/1652
Shot weight(PS) oz 32.8/44.7/58.4
Screw diameter mm 60/70/80
Injection pressure Mpa 226/166/127
Scerw L:D ratio - 233/317/414
Screw stroke mm 350
Screw speed(stepless) rpm 159
CLAMPING UNIT
Clamping force KN 3200
Opening stroke mm 580
Platen size mmxmm 950X950
Space between tie bars mmxmm 670X670
Max.daylight mm 1235
Mold thickness（Min.Max） mm 220-655
Hydraulic ejection stroke mm 180
Hydraulic ejection force KN 77.3
Ejector pin - 8+1
POWER UNIT
Hydraulic system pressure MPa 17.5
Pump motor KW 30
Heating capacity KW 18.3
Number of temp control zones - 6
GENERAL UNIT
Oil tank capacity L 820
Machine dimensions mxmxm 6.83X1.6 X2.05
Machine weight Kg 13000

 
 
 
 
 

123NextPage




Download links for : << City Opelika Purchasing Department will receive sealed bids purchase Heavy Duty Combi Tool >>
"Hydraulic ejection force KN Ejector pin POWER UNIT Hydraulic system pressure MPa Pump motor"


How to Download
You may need eMule or Bittorrent to download ebook torrents or emule links.

Report Dead Link
Please leave a comment to report dead links, so that someone else may update new links.

Search More...

[share-ebook]Hydraulic ejection force KN Ejector pin POWER UNIT Hydraulic system pressure MPa Pump motor

 

Related Books


Books related to :

<< City Opelika Purchasing Department will receive sealed bids purchase Heavy Duty Combi Tool

This Blueprint designed a supplemental resource OTS Grant Program Manual >>




See all the reviews

    Hydraulic ejection force KN Ejector pin POWER UNIT Hydraulic system pressure MPa Pump motor

    Description UNIT BT60V-II
    INJECTION UNIT
    Shot volume cm3 68/86/
    Shot weight(PS) g 60/78
    Shot weight(PS) oz 2.1/2.8
    Screw diameter mm 25/28
    Injection pressure Mpa 223/178
    Scerw L:D ratio - 22/22
    Screw stroke mm 140
    Screw speed(stepless) rpm 260
    CLAMPING UNIT
    Clamping force KN 600
    Opening stroke mm 270
    Platen size mmxmm 540x540
    Space between tie bars mmxmm 310x310
    Max.daylight mm 570
    Mold thickness（Min.Max） mm 130-300
    Hydraulic ejection stroke mm 80
    Hydraulic ejection force KN 28.5
    Ejector pin - 4+1
    POWER UNIT
    Hydraulic system pressure MPa 14.5
    Pump motor KW 7.5
    Heating capacity KW 4.85
    Number of temp control zones - 4
    GENERAL UNIT
    Oil tank capacity L 160
    Machine dimensions mxmxm 4.3x1.1x1.7
    Machine weight Kg 2600
     
     
     
     
     
     
     

    Description UNIT BT80V- II
    INJECTION UNIT
    Shot volume cm3 120/163/212
    Shot weight(PS) g 113/153/199
    Shot weight(PS) oz 4/5.4/7
    Screw diameter mm 30/35/40
    Injection pressure Mpa 220/161/124
    Scerw L:D ratio - 23:1/20.5:1/18:1
    Screw stroke mm 170
    Screw speed(stepless) rpm 0-180
    CLAMPING UNIT
    Clamping force KN 800
    Opening stroke mm 320
    Platen size mmxmm 540x540
    Space between tie bars mmxmm 360x360
    Max.daylight mm 680
    Mold thickness（Min.Max） mm 130-360
    Hydraulic ejection stroke mm 100
    Hydraulic ejection force KN 28.5
    Ejector pin - 4+1
    POWER UNIT
    Hydraulic system pressure MPa 14.5
    Pump motor KW 7.5
    Heating capacity KW 6.5
    Number of temp control zones - 4
    GENERAL UNIT
    Oil tank capacity L 200
    Machine dimensions mxmxm 4.87x1.1x1.7
    Machine weight Kg 300

     

     
     
     
     
     
     

    Description UNIT BT120V-II
    INJECTION UNIT
    Shot volume cm3 182/238/301
    Shot weight(PS) g 171/225/283
    Shot weight(PS) oz 6/8/10
    Screw diameter mm 35/40/45
    Injection pressure Mpa 222/169/134
    Scerw L:D ratio - 23:1/20.5:1/18:1
    Screw stroke mm 190
    Screw speed(stepless) rpm 0-187
    CLAMPING UNIT
    Clamping force KN 1200
    Opening stroke mm 340
    Platen size mmxmm 590x590
    Space between tie bars mmxmm 410x410
    Max.daylight mm 790
    Mold thickness（Min.Max） mm 145-450
    Hydraulic ejection stroke mm 100
    Hydraulic ejection force KN 34.3
    Ejector pin - 4+1
    POWER UNIT
    Hydraulic system pressure MPa 17.5
    Pump motor KW 11
    Heating capacity KW 8.85
    Number of temp control zones - 5
    GENERAL UNIT
    Oil tank capacity L 200
    Machine dimensions mxmxm 4x1.18x1.7
    Machine weight Kg 3000

     
     
     
     
     
     
     
     
     
     

    Description UNIT BT150V-II
    INJECTION UNIT
    Shot volume cm3 270/342/422
    Shot weight(PS) g 254/321/397
    Shot weight(PS) oz 9/11.3/14
    Screw diameter mm 40/45/50
    Injection pressure Mpa 209/166/134
    Scerw L:D ratio - 23:1/20.5:1/18:1
    Screw stroke mm 215
    Screw speed(stepless) rpm 0-205
    CLAMPING UNIT
    Clamping force KN 1500
    Opening stroke mm 410
    Platen size mmxmm 670x670
    Space between tie bars mmxmm 460x460
    Max.daylight mm 910
    Mold thickness（Min.Max） mm 160-500
    Hydraulic ejection stroke mm 130
    Hydraulic ejection force KN 42
    Ejector pin - 4+1
    POWER UNIT
    Hydraulic system pressure MPa 17.5
    Pump motor KW 15
    Heating capacity KW 9.76
    Number of temp control zones - 5
    GENERAL UNIT
    Oil tank capacity L 250
    Machine dimensions mxmxm 4.7x1.2x1.8
    Machine weight Kg 4100

     
     
     
     
     
     
     

    Description UNIT BT200V-II
    INJECTION UNIT
    Shot volume cm3 389/481/692
    Shot weight(PS) g 365/452/650
    Shot weight(PS) oz 12.9/16/23
    Screw diameter mm 45/50/60
    Injection pressure Mpa 217/176/122
    Scerw L:D ratio - 23:1/20.5:1/17:1
    Screw stroke mm 245
    Screw speed(stepless) rpm 0-146
    CLAMPING UNIT
    Clamping force KN 2000
    Opening stroke mm 460
    Platen size mmxmm 740X740
    Space between tie bars mmxmm 510X510
    Max.daylight mm 1010
    Mold thickness（Min.Max） mm 180-550
    Hydraulic ejection stroke mm 150
    Hydraulic ejection force KN 49
    Ejector pin - 4+1
    POWER UNIT
    Hydraulic system pressure MPa 17.5
    Pump motor KW 18.5
    Heating capacity KW 9.76
    Number of temp control zones - 5
    GENERAL UNIT
    Oil tank capacity L 260
    Machine dimensions mxmxm 5.2X1.3X1.9
    Machine weight Kg 5000

     
     
     
     
     
     
     
     
     

    Description UNIT BT260V-II
    INJECTION UNIT
    Shot volume cm3 588/848/1154
    Shot weight(PS) g 552/800/1085
    Shot weight(PS) oz 19.5/28.3/38.3
    Screw diameter mm 50/60/70
    Injection pressure Mpa 232/161/118
    Scerw L:D ratio - 25:1/21:1/18:1
    Screw stroke mm 300
    Screw speed(stepless) rpm 0-154
    CLAMPING UNIT
    Clamping force KN 2600
    Opening stroke mm 520
    Platen size mmxmm 835X835
    Space between tie bars mmxmm 580X580
    Max.daylight mm 1120
    Mold thickness（Min.Max） mm 195-600
    Hydraulic ejection stroke mm 180
    Hydraulic ejection force KN 77
    Ejector pin - 8+1
    POWER UNIT
    Hydraulic system pressure MPa 17.5
    Pump motor KW 22
    Heating capacity KW 14
    Number of temp control zones - 6
    GENERAL UNIT
    Oil tank capacity L 462
    Machine dimensions mxmxm 5.7X1.3X2.2
    Machine weight Kg 10000

     
     
     
     
     
     
     
     
     

    Description UNIT BT320V-II
    INJECTION UNIT
    Shot volume cm3 989/1346/1759
    Shot weight(PS) g 928/1266/1652
    Shot weight(PS) oz 32.8/44.7/58.4
    Screw diameter mm 60/70/80
    Injection pressure Mpa 226/166/127
    Scerw L:D ratio - 233/317/414
    Screw stroke mm 350
    Screw speed(stepless) rpm 159
    CLAMPING UNIT
    Clamping force KN 3200
    Opening stroke mm 580
    Platen size mmxmm 950X950
    Space between tie bars mmxmm 670X670
    Max.daylight mm 1235
    Mold thickness（Min.Max） mm 220-655
    Hydraulic ejection stroke mm 180
    Hydraulic ejection force KN 77.3
    Ejector pin - 8+1
    POWER UNIT
    Hydraulic system pressure MPa 17.5
    Pump motor KW 30
    Heating capacity KW 18.3
    Number of temp control zones - 6
    GENERAL UNIT
    Oil tank capacity L 820
    Machine dimensions mxmxm 6.83X1.6 X2.05
    Machine weight Kg 13000

     
     
     
     
     
    123NextPage
    << City Opelika Purchasing Department will receive sealed bids purchase Heavy Duty Combi ToolThis Blueprint designed a supplemental resource OTS Grant Program Manual >>